Emulex NQTR0V-NATM - Manual (Page 123)

4-20 Chapter 4
Events reported for an MIO printer interface, with the Syslog
severity/priority shown in parentheses:
− Load paper (warning)
− Memory out (error)
− Paper jam (error)
− Paper out (error)
− Printer cover/door open (error)
− Printer off-line (error)
− Ready (info)
− Toner low (warning)
Events reported for a parallel (Centronics) printer interface:
− Paper out (error)
− Power off (error)
− Printer off-line (error)
− Ready (info)
No status information is available on serial ports.
The syslog messages will contain the following components:
− A date/time stamp generated on the syslog host
− The server’s node name and/or IP address
− The printer’s physical port number
− A brief description of the event
The reporting of printer events will be automatically enabled if there is one
or more nodes configured for Syslog support. If no nodes are configured,
syslog reporting will be disabled.
1) Login to printer server as supervisor.
2) Enter this command to display a list of syslog server hosts:
>
Server>> show node syslog