Emulex NQTR0V-NATM - Manual (Page 63)

Printer Server Installation 2-43
Serial Port
Connect to the serial port with a null modem cable. The serial port provides a
male DB9 connector and allows user to:
• Print to a serial printer or plotter.
• Monitor the printer server by connecting an ANSII compatible terminal or
a PC running an ANSII terminal emulation program.
The Emulex default port configuration is set for 9600 bps, 8 data bits, no
parity, 1 stop bit, DTE type, with softcopy emulation.
• Input print jobs directly by connecting to a host system serial port (e.g. an
HP 3000).
NOTE: Serial cable between the printer server and the
peripheral device or console terminal should not
exceed 50 feet (15.24 meters). Connection can be
made through a null modem cable.
Power Up
CAUTION: The AC power outlet must be accessible for
immediate removal of power
1) Verify all switch settings are correct.
2) Verify the Token Ring LAN connection to the printer server is secure.
3) Verify all serial and parallel cable connections are secure.
4) Attach the modular power supply cable to the printer server jack labeled
+5 VDC.