Emulex NQTR0V-NATM - Manual (Page 190)

9-8 Chapter 9
2) Enter:
>
Server>> change service lpd port all disable
>
Server>> change service printer_name TCP_port_n
PORT n telnet disable filter [enable |disable]
printer_name The unique printer name to assign
TCP_port_n The TCP port name other than 515. Emulex
suggests starting at 3000
n The physical parallel port of the printer server
enable|disable Enable is equivalent to TEXT and inserts a carriage
return <CR> with each line feed <LF>. Disable is
equivalent to PASSTHRU and sends data with no
changes.
For example:
The following commands change the name of the printer on the
parallel port to Parallel which supports a PostScript printer:
>
Server>> change service lpd port all disable
>
Server>> change service parallel 3001 port 1
To include an ID for the newly created printer, enter the following
command:
>
Server>> change service parallel id “HP4si on
default printer server name in Room 1231
”
3) Return to Windows NT to complete the remaining steps:
4) Click the S HARE T HIS P RINTER O N T HE N ETWORK option in the C REATE
P RINTER dialog box:
Select this option to provide other users with access to this printer.