Emulex NQTR0V-NATM - Manual (Page 154)

Lan Manager 7-11
1) Select desired options.
2) Click OK.
This returns the user to the A DD N EW P RINTER window.
3) Click A DD .
The printer is now ready for use. Continue with the Printer Test section.
NOTE: The service to connect to on the Emulex printer
server must have the NetBios Protocol enabled
before printing.
Printer Test
Test the printer as follows:
1) Close all windows.
2) Verify the printer and Emulex server are powered up and the printer is
on-line.
3) Select a text file (for example, README.TXT) from any folder.
4) Drag the file to the P RINTER icon.
5) Select P LAIN -T EXT when prompted.
The file should print.
NOTE: LAN Manager does not validate the Service Name,
IP Address, or Port Number parameter values. If
the printer changes to the off-line state when
attempting to print, check that the above
parameters have been entered correctly.