Emulex NQTR0V-NATM - Manual (Page 33)

Printer Server Installation 2-13
NETQue Pro2
Reference Numbers
It is important that you make a note of the printer server’s unique ethernet
address (known as the Media Access Control or MAC address) and its serial
number. The figure below shows the locations of these numbers.
MAC ADDRESS
00-00-C9-01-A0-6A
POWER
MAC Address
Serial Number
(bottom panel)
Figure 2-7: Location of Reference Numbers
Although the following information is clearly printed on the unit, we suggest
you write the numbers here for later reference.
Ethernet (MAC) address: 00-00-C9- ___ ___-___ ___-___ ___
Serial Number: ____ ____ ____ ____ ____ ____ ____
Next, enter the default printer server name. This name begins with a three
digit prefix unique to the type of printer server. The remaining digits are
taken from the last six characters of the MAC address, without the dashes.
For example, the prefix for the NETQue Pro2 is NP2. Combined with a
MAC address such as 00-00-C9-01-A0-6A, the default server name for this
printer server will be NP201A06A.
The default printer server name is very important and is always used when
installing the printer server for the first time. Once a successful installation
has been accomplished, the default printer server name can be changed.
Default Server Name: NP2 _____ _____ _____ _____ _____ _____
NOTE: Use the default printer server name when installing
the printer server for the first time.