Emulex NQTR0V-NATM - Manual (Page 86)

3-4 Chapter 3
Add the Printer Server
From the A VAILABLE O PTIONS menu:
1) Select P RINT S ERVER I NFORMATION .
2) Press I NSERT .
3) Enter the Emulex default server name.
The Emulex default server name is defined in the Before Installation
section of this chapter.
4) Select the newly defined print server.
Add the Printer
1) Select P RINT S ERVER C ONFIGURATION .
2) Select P RINTER C ONFIGURATION .
3) Select one of the not-installed printers from the list.
4) Enter the Emulex default printer name.
The Emulex default printer name is defined in the Before Installation
section of this chapter.
5) Press E SC .
6) Select Y ES to confirm the save.
Select the Print Queue
From the P RINT S ERVER C ONFIGURATION menu:
1) Select Q UEUES S ERVICED BY P RINTER .
2) Select the printer server printer name.
3) Press I NSERT .
This displays the list of available queues.
4) Select the queue to be serviced by the printer.
5) Enter a priority level.
The default is 1, which is the highest priority.
To service several queues with the printer, repeat Steps 3 and 4 for each
additional queue.