Emulex NQTR0V-NATM - Manual (Page 159)

7-16 Chapter 7
10) Enter desired TELRCF options in the Parameters box.
Available options:
-h server_name or ip_address
-p rcf_tcp_port_number (default is 2048)
-f script_file_name
-t output_file_name
-e escape_character (default is <Ctrl>C)
11) Select either OS/2 F ULL S CREEN or OS/2 W INDOW .
12) Click the C HANGE button to close the window.
TELRCF is configured and ready for use.
Use TELRCF
TELRCF may be used to login to the printer server to issue configuration
commands. In addition, TELRCF provides a convenient method for
downloading an entire configuration script to the printer server.
To use TELRCF:
1) Open the E MULEX P RINT M ANAGER window.
2) Select the new icon (previously configured in the section above).
This opens the TELRCF window and connects to the specified server
with the IP address or server name.
3) Make desired changes.
4) Press <C TRL >B REAK to terminate the session.
This action disconnects the session and closes the window.