Requirements, Bindery mode, Nds mode – Emulex NQTR0V-NATM User Manual
Page 83: Requirements -1, Indery
Novell NetWare 3-1
You may configure in the Novell NetWare environment using either
pconsole (as explained in this chapter) or the NET wizard printer server
administrator. Refer to the Emulex NET wizard printer server administrator
User Guide for installation instructions.
Requirements
Emulex printer servers support both bindery and NetWare Directory
Services
™ (NDS) modes. Before continuing with the installation, make sure
the network adheres to these requirements:
Bindery Mode
• Clients must support the NetWare Fileserver version 2.x or greater.
NDS Mode
• Clients must support the NetWare Fileserver version 4.x or greater.
• Clients managing the NDS tree must be running the NetWare Dos
Requester
™ (VLM).
• An Emulex printer server running printer server software revision 5.0 or
higher.
• An NDS server no more than 2 hops away from the Emulex printer
server containing an NDS partition replica with the 4.x Pserver object.