Empire Comfort Systems PV-28SV50-B - Manual (Page 23)

24820-1-0409 Page 23
Available from Empire Comfort Systems, Inc.
INSTALL FOAM GASKET
FLUE ADAPTOR
PLASTIC GASKET
THREADED CONNECTOR
Attach flue adaptor to back of heater with four (4) screws.
Note: No PVC cement is needed
to install flue adaptor kit.
Install plastic gasket and screw threaded connector to the flue adaptor.
When these connections are made, continue with your vent run.
Cement all PVC joints on vent run.
PVVK-SH HORIZONTAL VENT ADAPTOR KIT