HP V8.5 - Manual (Page 20)

3
I N S T A L L A T I O N
3-3 V8.5e Rev 2.2.2002
3.3 INTERFACE SETUP
Plug the power cord into a grounded AC outlet only. Avoid sharing
an outlet that is also powering other noise-generating equipment.
The V8.5e comes equipped with a Versatec short line TTL (transistor
to transistor logic) interface. This interface can be used for data cable
lengths up to 50 feet.
An optional long line interface (differential) can be used for data
cable lengths up to 700 feet.
For optional Centronics interface setup, see Appendix C.
An external SCSI (Small Computer System Interface) is also available.
Please contact your Imaging Systems Group Inc. product
representitive for further information.
3.4 MEDIA INSTALLATION
CAUTION: Do not attempt to plot or form feed without the print
medium installed. This may damage the print head and will void the
warranty.
VORSICHT: Versuchen Sie bitte nicht, einen Druckvorgang oder
Papiervorschub zu starten, wenn sich kein Druckmedium im Plotter
befindet. Dies kann zu einer Beschädigung des Druckkopfes und zum
Verlust der Garantie führen.