HP V8.5 - Manual (Page 32)

4
O P E R A T I O N
4-5 V8.5e Rev 2.2.2002
Changing function settings
For easy reference in this section, the buttons are referred to as
numbers 1, 2, and 3, from top to bottom. (See Table 4-1 for button
labels and functions.)
1. Press Button 1 to turn the plotter offline. Settings can only be
changed while the plotter is offline. The green ONLINE status light
turns off and the display will show:
—— indicating offline status.
2. Press Button 3 to scroll through the menus.
3. For each menu item, press Button 1 or 2 (up or down arrows)
until the desired setting (or sub menu item) is shown in the display
for that menu.
4. Save the setting by pressing and holding Button 3
(MENU/SAVE) Display shows:
NOTE: Press and hold the MENU/SAVE button immediately after the
desired function setting is displayed. Advancing through the menu
without doing so will not save your changes.
5. The display will then show the offline display: —— . Repeat steps
2 through 4 for each function setting.
6. Press button 1 to return to ONLINE mode. Display will be blank
and online LED will be illuminated.
4.3 CONTROL PANEL FUNCTIONS AND SETTINGS
See Table 4-2 for default settings and organization.