HP V8.5 - Manual (Page 36)

4
O P E R A T I O N
4-9 V8.5e Rev 2.2.2002
Scaling
The scaling function stretches or shrinks the plot over a 36-inch
length of plot with settings being
S0 through SE . The default
setting is ( S 2 ). To determine if scaling is needed, plot a job of a
known length and measure it. Adjustments can be made to the
scaling in increments of + or - 1/16-inch over 36 inches of plot.
S0
= no scale,
SE = +/- 14/16” over 36 inches of plot.
Note: Positive or negative scaling is selected through the Emulation
menu setting.