HP V8.5 - Manual (Page 57)

6
M A I N T E N A N C E
6 - 3 V8.5e Rev 2.2.2002
6.2 REGULAR MAINTENANCE
The V8.5e thermal plotter is engineered to require minimal
preventative maintenance. If the thermal printhead and platen roller
are cleaned regularly, and the plotter is kept free of debris, extra
maintenance should rarely be required.
This minimal preventative maintenance is the customers
responsibility. Damage to the plotter that has in The Imaging System
Group’s opinion resulted from neglect or misuse will not be covered
under warranty.
CAUTION: No parts of the V8.5e require lubrication. All bearings are
sealed and self-lubricating. These bearings must be replaced in pairs if
one fails by authorized repair depot.
VORSICHT: Kein Teil des V8.5e erfordert Schmierung. Alle Kugellager
sind geschlossen und selbstschmierend. Diese Lager dürfen nur
paarweise durch eine autorisierte Servicewerkstatt ausgetauscht
werden, falls eines defekt wird.