High End Systems AXON - Manual (Page 100)

CHAPTER 9
Graphic Functions: Opacity and Effects
80 Axon Media Server User Manual
Effect 1 Mode and Effect 2 Mode
Two Effect Mode parameters are available for each individual 3-D object, each with three
Modifier parameters. Both Effect parameters have an identical list of color and visual effect
options. This lets you apply a dual-effect combination to the selected 3-D object.
Note: Not all modes combine effectively. For example, you cannot glow a
wobbulating object very well.
The table below describes the interaction between an Effect Mode parameter and its three
associated Modifier parameters. You can find a detailed description and example of each option
in Chapter 13: Effect Mode Options Descriptions on page 119.
Note: Modifier channels for Effect Mode 1 are labeled as CMY in the Wholehog 3
system so you can also make use of the color picker, HSI, and other
Wholehog 3 functions. Use the CMY parameter controls to adjust the three
Effect Mode 1 Modifier parameters for both the Global and Graphic fixture
types. The default for Effect Mode 1 is set to CMY1 as well. Effect Mode 2
Modifier channels are labeled Mod 1, Mod 2, and Mod 3.
DMX
Value
Effect Mode Adjustments
Name/Definition Modifier 1 Modifier 2 Modifier 3
0 Safe, no effects selection NA NA NA
1 CMY (RGB inverse) Cyan Magenta Yellow
2 CMY add to all pixels Cyan Magenta Yellow
3 CMY add to all non-black pixels Cyan Magenta Yellow
4 RGB add, all pixels Red Green Blue
5 RGB add 2, all pixels Red Green Blue
6 RGB add to all non-black pixels Red Green Blue
7 RGB swap to BRG Red to Blue Green to Red Blue to Green
8 RGB swap to GBR Red to Green Green to Blue Blue to Red
9 Solarize 1 If color value < DMX value, invert color Red Green Blue
10 Solarize 2 If color value > DMX, invert color Red Green Blue
11 Solarize 3 If color value < DMX, set color to 0 Red Green Blue
12 Solarize 4 If color value > DMX, set color to 0 Red Green Blue
13 DotP and resample Red Green Blue
14 Color cycle DMX value controls cycle speed Red Green Blue
15
All or Nothing If color value > mod value
color = 255, else color = 0
Red Green Blue
16 RGB, Solid color Red Green Blue