High End Systems AXON - Manual (Page 26)

CHAPTER 2
Setup and Configuration
6 Axon Media Server User Manual
Before sending anything to the factory, call your High End Systems dealer/distributor
for a Return Material Authorization (RMA) number. The factory cannot accept any goods
shipped without an RMA number.
Replacing a Power Cord Cap
Axon ships with an IEC power cord. Different locations (even within the same country) may
require a different power cord cap to connect the server to a power outlet. Because of the variety
of power cord caps used worldwide, High End Systems, Inc. cannot make specific
recommendations for the power cord cap. Contact a local authority for the type of power cord cap
needed. When installing the power cord cap, note that the cores in the mains lead are colored
according to the following code:
• green and yellow = earth
• blue = neutral
• brown = live
Installing a Line Cord Cap - U.K. Only
In the United Kingdom, core colours in the mains lead of this equipment may not correspond with
the colored markings identifying the terminals in the fixture’s plug. In that case, install a line cord
cap according to the following code:
• Connect the green and yellow core to the plug terminal marked with the letter “E,” or by the
earth symbol or coloured green, or green and yellow.
• Connect the blue core to the terminal marked with the letter “N” or coloured black.
• Connect the brown core to the terminal marked with the letter “L” or coloured red.
WARNING:
Class 1 equipment - This equipment must be earthed.
Vatic Fitter Heads Information - Danmark
Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
eller
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket