High End Systems AXON - Manual (Page 202)

CHAPTER 15
Content Management Application (CMA)
182 Axon Media Server User Manual
Viewing Server Configuration
The CMA lets you remotely view and modify fixture settings.
Some settings like Lamp Hours, Software Versions, etc. are view only. Other settings such as
Fixture ID, various Projector settings, DMX Start Channel, etc. can be modified (configured).
All of these settings are also available for DL.3 and DL.2 fixtures through the Digital Light
onboard menu system. The CMA also has some additional configuration features that let you:
• Assign a name to servers connected over the network for easier identification of servers on
your network.
• Compare all the Configuration Items of a certain type for a group of fixtures. For example,
viewing the DMX Start Channels of all the fixtures on a network.
• Control monitor display settings for Axon media servers.
Viewing Current Configuration of All Servers
To view configuration information for all Servers on the network, select All Configurations in the
left pane. The right pane now displays configuration values for all the media servers on the
fixture link in a sortable table. Click in the column heading to sort by that column’s values. A +
symbol appears in the “sort by” column heading.
The Configuration table viewed in the right pane of the CMA window contains the following
information for one or all servers:
• The Fixture ID from 1-255
• The Fixture Name you have assigned
• The IP Address
• Model type
• The DMX Start Channel currently assigned to each server
• The current lamp hours for each server