High End Systems AXON - Manual (Page 34)

CHAPTER 2
Setup and Configuration
14 Axon Media Server User Manual
Select a DMX Source type by clicking on the down
arrow of the Source field to select DMX412 or ArtNet.
Select a DMX Protocol type by choosing Standard,
Dual, or Single from the drop down list in the option
field.
The Protocol you select is based on how many DMX
channels are required for your application.
• Standard Protocol channel range = 149
• Dual Protocol channel range = 111
• Single Protocol channel range = 73
For more information, see Appendix A: DMX Protocol on
page 195.
Edit the DMX Start Channel by entering a valid Start Channel for the protocol type you have
chosen. For more information on selecting a valid start channel, see Determining a DMX Start
Channel on page 18.
• Standard protocol valid start channel = 1–364
• Dual Protocol valid start channel = 1–402
• Single Protocol valid start channel = 1–440
Shutting Down the Server
1. A DMX controller can shut down the server remotely with the shutdown option of the Global
Control channel (see Shutdown and Reset Options on page 92).
2. Manually turn the unit off with the power switch located behind the right door on the front
panel. If you choose to shut down with the power switch, you will need to manually turn it
back on the next time you boot up the server.