High End Systems AXON - Manual (Page 25)

Axon Media Server User Manual 5
Chapter 2:
Setup and Configuration
Hardware setup includes mounting, connecting to power and Ethernet and
DMX linking. Software setup includes launching the Content Management
Application (CMA) and setting configuration options.
Hardware Setup
The following steps make up the hardware setup for Axon and are described in this section
1. Unpack Axon Media Server
2. Install power cord cap if necessary for your location
3. Connect a monitor to the top DVI port and to power for accessing the Content
Management Application (CMA). A DVI/VGA Adapter is supplied if needed.
4. Connect a monitor or other output device to the bottom DVI port and to power. A
DVI/VGA Adapter is supplied if needed.
5. If you want to use the CMA from a remote computer or synchronize this server
with other Axon and DL.2 units, connect to Ethernet link
6. Connect Axon to a DMX controller via DMX cabling or an Art-Net box on an
Ethernet network.
7. Connect Axon to power
Unpacking the Axon Media Server
Your Axon media server ships with the following:
• Rack mountable Axon unit
• USB Mouse
• USB Keyboard
• Power Cord
• Two DVI/VGA Adapters
• DMX Interface cable.
• Documentation CD that contains
— CMA application (Mac and Windows)
— User Manual in .pdf format
— Server software
— Recovery software image
High End Systems® assumes no responsibility for products that are damaged during transport.
Return a product for repair in its original packaging.