Home Automation CAMERA SERVER 87A00-1 - Manual (Page 19)

• SNAPSHOT: Save a snapshot of current video image.
Note: The file is saved in \My Documents\Snapshot folder
• Full Screen: Stretches the camera image to fill the full screen.
• PTZ: Virtual PTZ control keyboard is displayed. This is used to control PTZ cameras.
• Motion View: When motion detection is set on the Event menu, you can see the detection
status on the current image screen.
• OSD View: Shows the current image information, RTSP address, Channel number, FPS, Frame
type, Frame Size, and Date and time on the image view screen.
• Audio Enable – Allows you to listen to the audio sound. To enable this function, the audio
connection cable should be connected to IP Products from the video source.
• MIC Enable – Allows you to send the audio through a microphone from your PC to the site
where the camera is installed. The audio input from the microphone will be transmitted via
network.
13