Home Automation CAMERA SERVER 87A00-1 - Manual (Page 34)

5.4. Event Setup
This manual assumes that Motion Detection is an event action trigger. So, consider this carefully and
follow the setting step as the order below. If your event factor is not Motion Detection, you can just skip
Step2: Motion setting.
Step 1: Event Server setting
Step 2: Motion setting
Step 3: Event setting (related to the event setting and motion detection setting you configure)
The event server supports SMTP, TCP, and FTP servers.
Select Motion from the Event menu. Select the Event Server tab.
To apply this event function, configure the Event server first, and then enter the Motion settings.
Caution
!
Before configuring the event server, the following should be configured first:
• Go to the Video -> Advanced menu on the left of this page and turn
on Copying a image to shared memory by setting it to Yes
5.4.1. Event Server Settings
28