Home Automation CAMERA SERVER 87A00-1 - Manual (Page 58)

52
6. Resetting the Camera Server
6.1. Rebooting
The camera server can be rebooted as follows:
1. Press the Reset button for 1 second.
¾ The Status LED and Network LED will blink together, twice. Stop pressing the Reset
button.
2. When the reset function has been completed, The Status LED and Network LED will stop
blinking.
6.2. Reset to Factory Default
The camera server can be initialized to factory default settings as follows:
1. If the Camera Server is powered-up, disconnect the power removing the power input.
2. Apply power to the Camera Server.
3. When the Status LED starts blinking rapidly, press the Reset button.
4. When the Status LED starts blinking slowly (about 5 seconds after booting), release the Reset
button.