Home Automation CAMERA SERVER 87A00-1 - Manual (Page 56)

5.7.3. PTZ
This page allows you to select the PTZ Protocol for each camera.
PTZ protocol options are shown in the drop down combo box.
You can choose a protocol for each camera.
1. Check Enable in the check box and choose the desired protocol.
2. Set the Addr and CommPort foe each camera input.
3. Click the Apply button.
PtzDriver
Select the desired protocol from the list.
Addr
Set the Addr value according to the ID set by dip switch on the PTZ camera.
CommPort(0-1)
0 = RS232C
1 = RS485C
50