Home Automation CAMERA SERVER 87A00-1 - Manual (Page 3)

DISCLAIMER
• While every effort has been made to ensure that the information contained in this guide is accurate
and complete, no liability can be accepted for any errors or omissions.
• HAI reserves the right to change the specifications of the hardware and software described herein
at any time without prior notice.
• No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language in any form, by any means, without prior written permission of HAI.
• HAI makes no warranties for damages resulting from corrupted or lost data due to mistaken
operation or malfunction of the Camera Server recording functions, the software, personal
computers, peripheral devices, or unapproved/unsupported devices.
SAFETY PRECAUTIONS
Users are strongly advised to adhere to the directions and recommendations offered in this manual.
Failure to do so may result in problems during operation.
• Make sure the correct voltage is being supplied before turning the power on.
• Do not install with the power turned on. Doing so may cause an electric shock.
• Do not install in a very humid environment. Doing so may cause an electric shock.
• Do not install in an area exposed to sunlight or heat. Doing so may cause deformation or
damage.
• Do not remove the product cover. Doing so may expose you to a hazard like electric shock.
• Do not use in areas containing flammable materials like propane gas and gasoline or in areas that
generate dust. Doing so may cause an explosion or fire.
• Do not dismantle, repair, or modify the product. Doing so may cause damage or an electric shock.
Refer all servicing to qualified personnel.
• Do not use water, thinner, or organic solvent for cleaning the product exterior. Doing so may
cause damage or an electric shock. Use a dry cloth instead and turn off the power before
cleaning.