Home Automation CAMERA SERVER 87A00-1 - Manual (Page 8)

1.2. Package Contents
Before installing the Camera Server, please make sure that the following items are included in the box:
1. Camera Server
2. 12VDC Power Adapter with Power Cord
3. 2 Terminal Block
4. 2
Audio Cables
5. Mounting Hardware
6. Software Utility and Manual CD
1.3. Factory Default Settings
Factory default settings are as follows:
IP address: 192.168.xx.yy
Mask: 255.255.0.0
Gateway: 192.168.0.1
User ID: root
Password: pass
The last two bytes of the MAC address represents the “xx” and “yy” for the default IP address of the
Camera Server. The last two bytes must be converted from hexadecimal to a decimal number.
After installation, the default IP address can be changed using one of the following methods:
¾ Using the built-in web interface.
¾ Using the “IPAdminTool” Software Utility included on the Software Utilities and Manual CD.
2