Home Automation CAMERA SERVER 87A00-1 - Manual (Page 22)

5.1. Video Setup
5.1.1. Video Settings
Select Video Settings from the Video menu to select the Video Type, Codec, Resolution, FPS, Bitrate
Mode, Bitrate, Quant, GOP size, Brightness, Contrast, Saturation, and Hue.
Note
i
Whenever a camera is viewed on an OmniTouch 5.7e or OmniTouch 10p,
the Resolution, FPS, Bitrate Mode, and Bitrate of the camera on the
Camera Server will automatically change based on the settings of the
camera in the OmniTouch touchscreen.
Video Type
Select the video type from the Video Type box. The video format is detected automatically when the
device boots up. If you change the video type manually to a certain type, it will only affect the FPS.
Video Codec
The video codec in the Camera Server is MJPEG.
16