Home Automation CAMERA SERVER 87A00-1 - Manual (Page 29)

5.3. Network Setup
The Network Setup page is used to configure various network and operational settings of the 87A00-1
Camera Server.
5.3.1. General Settings
IP Address Configuration
If the Network mode is set to DHCP, the IP address, Subnet mask, Gateway and DNS Server settings
will be received from a DHCP server. If Network mode is set to Static, the IP address, Subnet mask,
Gateway, and DNS Server settings must be manually configured.
The PPPoE feature can be used by entering the PPPoE ID and password provided by your Internet
Service Provider.
Note: You can obtain and modify the default network settings of the 87A00-1 Camera Server using the
IPAdminTool Software Utility (IPAdminTool.exe) included on the Software Utilities and Manual CD.
23