Home Automation CAMERA SERVER 87A00-1 - Manual (Page 46)

5.5.2. Recording on FTP server
Step 1: In order to record the video on an FTP server, the FTP server must be added in advance. Refer
to section 5.4.1.2 FTP Server Settings.
Step 2: Set Record Device as FTP.
Step 3: Set Record Mode as desired. Refer to section 4.5.1 Recording on USB flash drive.
Step 4: Set the FTP Server Number. This is available only after Step 1 has been completed.
Step 5: PostTime is set in seconds. If you want to record for 30 minutes, type 1800 for the value of
PostTime. The recording will continue for 30 minutes on when the Record button is presses.
Step 6: Set the Skip Frame and Record Frame as described below:
• Skip Frame:
This is the number of frames to skip between Record Frame. Refer to the examples below.
• Record Frame
This is the number of recorded frames. For example, if the value is 0, only 1 frame is recorded
after skipping the number of Skip Frame set above.
For example:
If “149” is set for Skip Frame, “0” for Record Frame, and “30” for FPS, you will get 1 frame
every 5 seconds.
If “5” is set for Skip Frame and “1” for Record Frame, you will get the frames as below.
F# 0 1 2 3 4 5 6 7 8 9 10 11 12 13
Recording Frame
레
Skip Frame
40