Home Automation CAMERA SERVER 87A00-1 - Manual (Page 43)

5.5. Record Setup
5.5.1. Recording on USB Flash Drive
Caution
!
Before removing the USB flash drive from the Camera Server after
recording…change the USB Mount value to No first. Otherwise, the recording
may not work properly.
Preparation before recording
Step 1: Insert the USB flash drive into the USB port on the Camera Server.
Step 2: Click Record from the Record menu and set the value of USB Mount to YES as above.
Step 3: Select USB for the value of Record Device.
Select which recording mode you want between Passive mode and Schedule mode.
For details, refer to the following explanations.
37