Honeywell ADEMCO LYNXR-EN - Manual (Page 44)

–44–
Voice Prompt Programming
!
All four digits of the Central Station Account number must be entered. If ten-digit format is selected, all ten digits
must be entered.
To Add Second Central Station Phone Number
Select
"Second Central
Station Phone
Number"
Press
[SELECT]
Enter second
central station
phone number
(up to 24 digits)
Press
[ADD]
Enter second
central station
account number
(up to 4 digits)
Press
[ADD]
To Add Second Central Station Account Number
Select
"Second Central
Station Account
Number"
Press
[SELECT]
Enter second
central station
account number
(up to 4 or 10 digits)
Press
[ADD]
Refer to the LYNXR Series Installation and Setup Guide to view the complete set of Template (default table) selections.
To Program a Template (Default Table)
Select
"Templates"
Press
[SELECT]
Select
template
5AA $
Press
[SELECT]
(6) Template selections
Template 1
Template 2
Template 3
Template 4
To Enter Expert Programming Mode
!
Once you have entered the Expert Programming Mode, the [ESCAPE] key can be used to return to the Voice Prompt
Programming mode.
Select
"Expert
programming
mode"
Press
[SELECT]
System switches to Expert
Programming Mode
(Refer to the LYNXR
Series Installation and
Setup Guide or the
LYNXR Series
Programming Guide for
additional programming
instructions)