Panasonic KX-TD500 - Manual (Page 113)

System
Programming Guide 113
Parameter 51. Release of BRI/PRI line while on-hold when
'DISCONNECT' signal is received
Default Release
Value Range 1. Release
2. Don't Release
Description/Function Specifies whether or not the system releases the ISDN BRI / PRI
line, when receiving the line disconnection message from the ISDN
Network while the line is placed on hold.
Reference • 2.3 ISDN Answering Features (F/G)
– Malicious Call Identification (MCID)
• 2.7.15 Identifying Malicious Callers (Malicious Call
Identification [MCID]) (U/M)
• 2.5
System Timer (P/G)
– Auto Shut-off Time
Parameter 52. Sending Mode of CLIP while CLIR is enabled (Q-Sig Line
only)
Default Private Network
Value Range 1. Private Network
2. Public Network
Description/Function Specifies the treatment of CLIP information when CLIR is set by
the extension user.
1. Private Network
The system does not send CLIP information to the ISDN Private
Network.
2. Public Network
The system sends CLIP information, which is not valid, to the
ISDN Public Network.
Reference • 3.3 Network Service Features (F/G)
– Calling Line Identification Presentation (CLIP)
– Calling Line Identification Restriction (CLIR)
• 2.7.5 Displaying Your Number on the Called Party and Calling
Party's Telephone (Calling/Connected Line Identification
Presentation [CLIP/COLP]) (U/M)
• 2.7.6 Preventing Your Number Being Displayed on the Called
Party's Telephone (Calling Line Identification Restriction [CLIR])
(U/M)