Panasonic KX-TD500 - Manual (Page 308)

DDI / DID
308 Programming Guide
Parameter DDI / DID / MSN No.
Default Blank
Value Range Up to 16 digits consisting of 0-9
Description/Function Specifies the DDI / DID / MSN number which will be sent from the
Central Office to the KX-TD500 system.
Note
• The DDI / DID / MSN number which has already been
assigned cannot be registered.
Reference • 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
– Multiple Subscriber Number (MSN) Ringing Service
Parameter Tenant No.
Default 1
Value Range 1-8
Description/Function Specifies the tenant used for DDI / DID call when "DDI / DID No."
is specified in "Tenant Select Mode for DDI / DID" programming
in Section "2.8 System Option".
Reference • 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.3 ISDN Answering Features (F/G)
– Direct Inward Dialling (DID)
• 2.8 System Option (P/G)
– Tenant Select Mode for DDI / DID
Parameter VPS Trunk Group No.
Default 1
Value Range 1-48
Description/Function Specifies the trunk group used for the call to the VPS when "DID /
DDI No." is specified in "Tenant Select Mode for DID / DDI"
programming in Section "2.8 System Option".
Reference • 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.3 ISDN Answering Features (F/G)
– Direct Inward Dialling (DID)
• 2.8 System Option(P/G)
– Tenant Select Mode for DID / DDI