Hand Held Products 3080 - Manual (Page 25)

Programming the Scanner
3-11
Symbology Programming
♦ User Defined Code ID ♦
PROGRAM END(Exit)
Family Code Selection Parameter Selection Option Code Option Code
Symbol ID : 1 character Code 128 (default=B)
UCC/EAN-128 (default=C)
UPC-A (default=A)
EAN/JAN/CAN-13 (default=F)
Codabar/NW-7 (default=D)
Code 39/Code 32 (default=G)
Code 93 (default=H)
Standard/Industrial 2 of 5 (default=I)
Interleaved 2 of 5 (default=J)
Matrix 2 of 5 (default=K)
China Postal Code (default=L)
German Postal Code (default=M)
IATA (default=O)
Code 11 (default=P)
MSI/Plessey (default=R)
UK/Plessey (default=S)
Telepen (default=T)
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Scan hex value (2 digits)
Symbol ID : 2 character UPC-E (default=E0)
EAN-8 (default=FF)
00
01
Scan hex value
(2 or 4 digits) [FIN]
Scan hex value
[2 or 4 digits] [FIN]
To determine the hex value for the “Character,” refer to the HEX/ASCII Table found on page A-6.