Hand Held Products 3080 - Manual (Page 32)

Programming the Scanner
3-18
Symbology Programming
♦ Code 11 & Code 93 Setting ♦
PROGRAM END(Exit)
Family Code Selection Parameter Selection Option Code
Code 11 Settings Select 1-check digit verification
Select 2-check digit verification
Disable check digit transmission
Enable 1-check digit transmission
Enable 2-check digit transmission
0
1
2
3
4
Code 11 Min. Length Default (04)
Minimum length
Scan 2 digits from the option code chart in the Appendix.
(2 digits)
Code 11 Max. Length Default (99)
Maximum length
Scan 2 digits from the option code chart in the Appendix.
(2 digits)
Code 93 Settings Disable check digit transmission
Enable check digit transmission 0
1
Code 93 Min. Length Default (03)
Minimum length
Scan 2 digits from the option code chart in the Appendix.
(2 digits)
Code 93 Max. Length Default (99)
Maximum length
Scan 2 digits from the option code chart in the Appendix.
(2 digits)
FACTORY DEFAULT