Hand Held Products 3080 User Manual
Page 51
Programming the Scanner
3-37
Select a Bar Code Symbology
You can use the Condensed Data Editor for an advanced
transmission arrangement with one or all bar code
symbologies. If you scan “00” to select all types, the scanner
arranges all incoming data to meet your pre-defined format. If
you want to select only one type of bar code, please select
one of the option codes listed below.
UPC-E : 03
UPC-A : 02
EAN/CAN/JAN-8 : 05
EAN/CAN/JAN-13 : 04
Code 32 : 07
Telepen : 13
Code 128 : 01
UCC/EAN 128 : 01
Code 39 : 07
Code 93 : 09
Codabar/NW-7 : 06
Code 25 Family : 08
Code 11 : 10
UK/Plessey : 12
MSI/Plessey : 11
Position Calculation
[Data Formatter]
If there is a 5-character input data string, refer to the following to
calculate the actual position for insertion:
X
X
X
X
X
00 01
02 03
04
05
[Data Verifier, Data Replacer, Data Organizer]
If there is an 11-character data string, please refer to the following
to calculate the actual position for identification.
X
X
X
X
X
X
X
X
X
X
X
00 01
02
03 04 05 06
07
08
09
10
Application Example
The bar code label is an all-numeric 16-digit Interleaved 2 of 5,
which includes the information of 6-digit date code, 6-digit
serial number, and 4-digit unit price, in that order. The data
code always starts with a “9.” If a scanned bar code meets the
above criteria, the data will be separated into three fields. Each
field should end with a “TAB.” The first digit of the date code,
which is a “9,” should be replaced with an “A.” The serial
number should start with SN. The first 2 digits of the unit price
should be skipped.
Actual Bar Code read : 9 8 1 0 2 5 1 2 3 4 5 6 9 8 7 6
Desired Output : A81025[TAB]SN123456[TAB]76[TAB]
Programming Procedure
[Important Notice]
Please note that the Condensed Data Editor will follow the preset
working flow as below:
Verifier Formatter Replacer Organizer
Consequently, when you set the identified position in the Data
Organizer, you must consider the inserted data that you have
already set via the Data Formatter.