Statement of agency compliance – Hand Held Products 3080 User Manual

Page 3

Advertising
background image

i

Statement of Agency Compliance

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

FCC Class A Compliance Statement

This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at his
own expense.

Caution: Any changes or modifications made to this
device that are not expressly approved by Hand Held
Products, Inc. may void the user’s authority to operate the
equipment.

Note:

To maintain compliance with FCC Rules and Regulations, cables

connected to this device must be shielded cables, in which the cable
shield wire(s) have been grounded (tied) to the connector shell.


Canadian Notice

This equipment does not exceed the Class A limits for radio noise
emissions as described in the Radio Interference Regulations of the
Canadian Department of Communications.

Le present appareil numerique n’emet pas de bruits radioelectriques
depassant les limites applicables aux appareils numeriques de la classe A
prescrites dans le Reglement sur le brouillage radioelectrique edicte par le
ministere des Communications du Canada.

The CE mark on the product indicates that the system has been

tested to and conforms with the provisions noted within the 89/336/ EEC
Electromagnetic Compatibility Directive, EN55022:1998 Class A.

For further information please contact:
Hand Held Products, Inc.
Nijverheidsweg

9

5627 BT Eindhoven
The

Netherlands

Advertising
This manual is related to the following products: