Hand Held Products 3080 - Manual (Page 33)

Programming the Scanner
3-19
Symbology Programming
♦ MSI/Plessey, Code 128 & UCC/EAN 128 Setting ♦
PROGRAM END(Exit)
Family Code Selection Parameter Selection Option Code
MSI/Plessey Settings Select MOD 10 check digit
Select MOD 10-10 check digit
Select MOD 11-10 check digit
Disable check digit transmission
Enable 1-check digit transmission
Enable 2-check digit transmission
0
1
2
3
4
5
MSI/Plessey Min. Length Default (04)
Minimum length
Scan 2 digits from the option code chart in the Appendix.
(2 digits)
MSI/Plessey Max. Length Default (99)
Maximum length
Scan 2 digits from the option code chart in the Appendix.
(2 digits)
Code 128/EAN-128 Settings Disable function code conversion
Enable function code conversion 0
1
Code 128/EAN-128 Min. Length Default (04)
Minimum length
Scan 2 digits from the option code chart in the Appendix.
(2 digits)
Code 128/EAN-128 Max. Length Default (99)
Maximum length
Scan 2 digits from the option code chart in the Appendix.
(2 digits)
FACTORY DEFAULT