HP QMS 1660 - Manual (Page 128)

End Job Mode
QMS 1660 Print System Reference 5-28
Adding an EOD Command to Your File
When adding an EOD command to your file, use the syntax for the
selected EOD command exactly as written (the command's syntax is
case sensitive).
Next Advances to the Operator Control/
Administration menu. CONFIGURATION
ADMINISTRATION
Select Accesses the Administration menu ADMINISTRATION
COMMUNICATIONS
Next Advances to the Communications/Parallel
(or Serial) menu. COMMUNICATIONS
PARALLEL ( or
SERIAL)
Select Accesses the Parallel (or Serial) menu. PARALLEL/SERIAL
MODE
Next Advances to the Parallel (or Serial)/End
Job Mode menu. PARALLEL/SERIAL
END JOB MODE
Select Accesses the End Job Mode menu. END JOB MODE
OPTION
Next Advances to the appropriate option (QMS
EOD, HP EOD, or None). END JOB MODE
OPTION
Select Selects the option. OPTION
IS SELECTED
Returns to the Parallel (or Serial)/End Job
Mode menu. PARALLEL/SERIAL
END JOB MODE
Online/
Offline Asks you if you want to save your
change. SAVE CHANGES?
NO
Next Advances to the Yes option. SAVE CHANGES?
YES
Select Saves your change and idles the printer. IDLE
Online/
Offline Puts the printer back on line. IDLE