HP QMS 1660 - Manual (Page 70)

Interfaces
QMS 1660 Print System Reference 4-38
serial interface priority over jobs received via the LocalTalk and paral-
lel interfaces.
Emulation
Sets the serial interface emulation.
End Job Mode
Enables (and identifies an end-of-job sequence) or disables data
stream sensing for the end-of-document (EOD) command. These
sequences allow hosts to enforce print job sequencing without con-
siderations for interacting timeouts. See chapter 5, “Additional Techni-
cal Information,” for details on how to implement this feature on your
QMS 1660 Print System.
Hardware Flow Control
Controls the flow of data between the printer and the host.
Menu Administration/Communications/Serial/Def Job Prio
Choices 001-100 (highest-lowest priority)
Default 001 (highest priority)
Menu Administration/Communications/Serial/Emulation
Choices ESP, Hexdump, HPGL, Lineprinter, PCL5, PostScript
Other optional emulations also appear, if installed.
Default ESP
Menu Administration/Communications/Serial/End Job Mode
Choices None—The printer recognizes only the PostScript ^D
command.
QMS EOD—The printer recognizes only the QMS
%%EndOfDocument command.
HP EOD—The printer recognizes only the HP
<ESC>%12345X command.
Default None
Menu Administration/Communications/Serial/Hdwe Flow Ctl