HP QMS 1660 User Manual
Page 189
Advertising
Storage
Options
6-51
Printer Options
2
Connect the other end of the cable to the IDE-SCSI board.
Align the colored stripe on the cable with pin 1 on the IDE-SCSI
board connector, and then slowly push the cable onto the con-
nector.
Notice that the cable is folded so the blue stripe aligns easily with
pin 1 on the connector.
▲
Caution:
The plastic ribbon cable is fragile. Handle it gently. Do not
pull on it or push down hard on it.
Pin 1
Advertising