HP QMS 1660 - Manual (Page 91)

Printer Engine
Features
4-59 Printer Configuration
Specifying Page Recovery Action
When a media jam or other similar error occurs, the printer has the
capability of reprinting the print job from the page on which the jam
occurred.
Setting Default Resolution
This option sets the print engine’s default resolution.
Setting Toner Options
Two toner cartridge configuration options are available: Conserve
Toner and Toner Out Act[ion].
Default No
Notes Gamma correction is automatically adjusted when printer
resolution is changed.
Gamma correction applies only to PostScript images.
Menu Administration/Engine/Page Recovery
Choices On—Reprints a print job from the page on which the jam or
error occurred.
Off—Don’t reprint a print job when a jam or error occurs.
Default Off
Menu Administration/Engine/Def Resolution
Choices 300 dpi—300x300 dpi resolution.
600 dpi—600x600 dpi resolution.
1200 dpi—1200x600 dpi resolution.
Default 600 dpi
Notes If you purchased a printer with 24 MB RAM, all resolutions are
available with all media sizes. However, if you purchased a
printer with 12 MB RAM, 600x600 dpi and 1200x600 dpi are
available only with certain media sizes. Using these
resolutions with other media sizes requires additional memory.
See appendix B, “Technical Specifications,” for details.