HP QMS 1660 - Manual (Page 255)

Updated DOC
Commands
C-19 Document Option Commands
Set Linefeed (Line Termination)
Format Boolean
Notes The result of various settings for these parameters
is shown in table below, in terms of the equivalent
code passed to the PCL line termination command
(
<ESC>&k#G ). The second setting (lfiscrlf on,
criscrlf off) is correct for most ASCII listings printed
from UNIX machines. PC listings should usually be
done with both items set to off, and Macintosh
listings usually require the third setting (lfiscrlf off,
criscrlf on). The following table shows the criscrlf/
lfiscrlf commands and the corresponding PCL Line
Termination command parameters.
LFISCRLF CRISCRLF PCL Code Comments
Off Off 0 CR
→
CR,LF
→
LF,FF
→
FF
On Off 2 CR → CR,LF → CR-LF,FF → CR-FF
Off On 1 CR → CR-LF,LF → LF,FF → FF
On On 3 CR → CR-LF,LF → CR-LF,FF → CR-FF
Syntax %%IncludeFeature:lfiscrlf (value)
Purpose Controls the default line termination mode (the <ESC>&k#G
command); specifies the line termination treatment of a
linefeed.
Variable value
Purpose Specifies whether a linefeed is treated simply as a
linefeed or as a carriage return-linefeed combination
Range Off/false — Treats linefeed as a linefeed.
On/true — Treats linefeed as carriage return-
linefeed combination
Default Printer configuration dependent