HP QMS 1660 - Manual (Page 89)

Printer Engine
Features
4-57 Printer Configuration
Vertical Offset
Horizontal and Vertical Controls
Horizontal and vertical controls are based on the leading edge of the
paper. Although they are consistent, they may seem to be reversed in
function, depending on the leading edge of the paper.
n
Media fed long edge first (for example, letter/A4) with por-
trait-oriented printing—horizontal and vertical seem reversed.
n
Media fed long edge first (for example, letter/A4) with land-
scape-oriented printing — horizontal and vertical operate as
expected.
n Media fed short edge first (for example, 11x17/A3) with por-
trait-oriented printing—horizontal and vertical operate as
expected.
n
Media fed short edge first (for example, 11x17/A3) with land-
scape-oriented printing—horizontal and vertical seem
reversed.
Menu Administration/Engine/Image Alignment/Vertical Offset
Choices 000-300 (0.00"-1.00")
Default 100 (0.33"/.84 mm)
Notes See the following sections, “Horizontal and Vertical Controls,”
and “Image Alignment Guidelines.”