HP QMS 1660 - Manual (Page 41)

Configuration
Menu
4-9 Printer Configuration
Saving Configuration Changes
Before the printer can accept print jobs with configuration changes,
the changes must be saved.
Select Access the Administration menu ADMINISTRATION
COMMUNICATIONS
Next Advance to the Communications/
Emulation menu. COMMUNICATIONS
EMULATIONS
Select Access the Emulations menu. EMULATIONS
ESP DEFAULT
EMUL
Next Advance to the Emulations/HP-GL menu. EMULATIONS
HP-GL
Select Access the HP-GL menu. HP-GL
PLOTTER
Next Advance to the HP-GL/Scaling Percent
menu. HP-GL
SCALING PERCENT
Select Access the Scaling Percent menu. SCALING PERCENT
100
Previous Lower the current character to 0. SCALING PERCENT
000
Select Select 0 and move the current character
to the next 0. SCALING PERCENT
000
Next
(4 times) Advance the current character to 5. SCALING PERCENT
050
Select Select 5 and move the current character
to the last 0. SCALING PERCENT
050
Select Select 50 as the default scaling percent. 50
IS SELECTED
After 3 seconds you are returned to the
HP-GL/Scaling Percent menu. HP-GL
SCALING PERCENT