2020 host escape commands – Honeywell 2020 User Manual
Page 59
2 - 13
2020 Host Escape Commands
Command
Action
<ESC> a
Indicate as if successful menu change made
<ESC> b
Indicate as if unsuccessful menu change made
<ESC> 1
Illuminate green LED for 135 milliseconds (followed by at
least 70 mSecs. dark time when multiple blinks)
<ESC> 2
Illuminate green LED for two seconds (followed by at least
500 mSecs. dark time when multiple blinks)
<ESC> 3
Illuminate green LED for five seconds (followed by at least
500 mSecs. dark time when multiple blinks)
<ESC> 4
One beep at low pitch tone
<ESC> 5
One beep at medium pitch tone
<ESC> 6
One beep at high pitch tone
<ESC> 7
Indicate as successful decode and communication to host.
<ESC> 8
Indicate as unsuccessful decode and communication to host.
1) Good Read
3) ACK: Host to Base
4) ACK: Base to Image
Scanner
2) Base sends
data to host