Henny Penny BCC/BCR-140 - Manual (Page 19)

Henny Penny Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350
3-5. CLEANING (Continued) 3. Use a vacuum cleaner, or soft brush to remove the dust, or
other obstructions from the condenser.
4. Finish cleaning with compressed air if possible.
DO NOT use a wire brush to clean the condenser, or
damage to the condenser could result.
5. Replace the front panel, and reconnect the electrical supply,
and unit is now ready for use.
3-6. SEASONAL OR 1. Remove all electrical power supplied to the unit by turning off
the wall circuit breaker.
2. Make sure the inside of the unit is clean and completely
dry.
3. Leave the door slightly ajar to prevent smells from devel-
oping inside the unit.
PROLONGED SHUTDOWN
3-9 201