Hawking Technology H-BR49 - Manual (Page 14)

List), Factory Reset, Save Configuration, or Firmware Upgrade. Click on
the desired setup item to expand the page in the main navigation pane. The setup
pages covered in this utility are described below.
WAN Port
The opening screen contains settings for the Global (Internet connection)
interface. Click on the down arrow  to select the desired Internet connection
mode on the list.
Obtain configuration automatically
(CATV dynamic mode) For users who are using Cable Modem
Internet service.
PPPoE (DSL dynamic mode)
For users who are using xDSL Internet
service that runs PPPoE. If your xDSL
service uses PPPoE, after installing the
IP Sharing device, do not run PPPoE
software on your computers.
Static configuration
Select this item when the ISP assigns a
static IP address for your account.
CATV dynamic Mode
Selecting this mode enables you to obtain a dynamic IP address from your ISP
via DHCP support. Once the IP address is obtained, you can access the Internet.
For most cases, this page needs no input. However, some ISPs may require some
information for identification purposes. For example: Device/Computer name
and Domain Name - please enter the information required to complete the
settings.