Hawking Technology H-BR49 - Manual (Page 28)

Network Adapter Address Filter
Filter according to the local
computer’s network adapter MAC
address (also known as the adapter
card’s Physical Address).
IP Address Filter Filter with the computer’s IP address.
Single/Range
You can filter a single IP, or a range
of IP addresses.
IP Range
Enter the Start and End IP addresses
for a range of IP addresses for
filter/forward.
Direction
From Local IP: filtering of an IP
address of a local computer; or
To Remote IP: filtering of an IP
address of a remote server (this
remote server connects to the device
via Internet).
TCP/UDP Port Filter
Filter using the port number. You can
set the filter for a single port or a
range of ports.
Filter/Forward
Please note that performing the Factory
Reset will erase all previously entered
device settings.
Select to Filter or Forward for the
following assigned port(s).
Single/Range
You can filter a single port, or a range
of ports
Port Number The port number(s) for the filters.
Port Type
TCP port: filter according to the
Connection-Based
Application Service on the
remote server using the port
number.
UDP port: filter according to
the Connectionless
Application Service on the
remote server using the port
number.