Hawking Technology H-BR49 - Manual (Page 45)

IP Address
• Default: 192.168.1.254
SubNet mask
• Default: 255.255.255.0
Do not distribute IP address to local computers 1
Checking this radio button to disable this Broadband Router from distributing IP
addresses to the local network.
Distribute IP addresses to local computers
Click this radio button to enable this Broadband Router to distribute IP addresses.
The following field will be activated for you to enter the starting IP address:
Start IP Address: Enter the starting address for this local IP network
address pool. The pool is a piece of continuous IP.
Number of IP addresses in pool
• Maximum: 253. Default: 253
Click to SAVE the settings.
WAN Port
This screen contains settings for the WAN interface. Different WAN interfaces
will have different displays, including ones for:
• ADSL/Cable modem (Obtain Configuration Automatically [CATV
Dynamic Mode] )
• ADSL with PPPoE enabled (PPPoE [DSL Dynamic Mode])
• Static Leased Line (Static Configuration)
Click to select the appropriate WAN interface for your environment.
1 If you check this selection, remember you have to specify a static IP address for each of your local
computers.