Hawking Technology H-BR49 - Manual (Page 24)

Change Administrator’s password:
1. Click the checkbox to enable this change.
2. Enter the new password.
3. Re-enter the new password for confirmation.
Limit Management
:
1. Click the checkbox to enable this function.
2. Enter the network adapter MAC address for Station 1.
3. Enter the network adapter MAC address for Station 2. If you are only
setting up one management station, leave the Station 2 MAC address
with all F.
Below are coordinate results of the Block WAN Request and HTTP management
for this device. Refer to this table for further Internet/system management.
V: Checked
O: Unchecked
Block WAN
Request Management
Via Internet
Coordinate Result
V
O
(automatically)
WAN requests over TCP 113 (IDENT) and
ICMP are rejected.
HTTP management is not allowed.
O V
WAN requests over TCP 113 (IDENT) and
ICMP are accepted.
HTTP management is allowed.
O O
WAN requests over TCP 113 (IDENT) and
ICMP are accepted.
HTTP managements is not allowed.