Delete all, Delete, Undo – Hawking Technology H-BR49 User Manual
Page 27: Packet filters
UNDO
Click UNDO to clear all the settings on this page.
ADD
Each time you finished setting, click ADD and the added
servers will appear on the Server List.
DELETE ALL
Click to delete all the servers on the list.
DELETE
Click the Index drop-down menu to select the desired server
number and then click DELETE to delete only the selected
server.
DMZ Host
Function:
If the DMZ Host Function is enabled, it means that you can set
up a DMZ host at a particular computer to be exposed to the
Internet so that some applications/software, especially
Internet/online games can have two-way connections. You can
enter up to four DMZ Hosts in the device.
DMZ LAN IP
Address
Enter the local IP address mapping to the client computer,
which you will want to use as the DMZ Host computer.
DMZ WAN IP
Address
Enter the WAN IP Address set for the DMZ Host.
UNDO
Click to clear all the settings on this page.
ADD
After completing the settings on this page, click “ADD” to save
the settings.
DMZ List
Display all the DMZ hosts.
DELETE ALL
Click to delete all the DMZ host(s) on the list.
DELETE
Click on the Index drop-down menu to select the desired host
number and then click DELETE to delete only the selected
host.
Packet Filters
In the Packet Filters setup screen, you can block specific internal users from
accessing the Internet and you can also disable specific Internet services. You
can set up the filters described in the tables that follow. Each filter can be set to
filter (drop) or forward (pass) packets. You can input up to 24 filters into this
device.